Detail Incubator Model IN-55
Ventilation and Control
· natural convection
· adjustment of pre-heated fresh air admixture
by air flap control in 10% steps
· vent connection with restrictor flap
· adaptive multifunctional digital PIDmicroprocessor
controller with high-definition
TFT-colour display
· self-diagnostics for fault analysis
· 1 Pt100 sensor DIN class A in 4-wire-circuit
· digital timer adjustable from 1 minute to 99
days, 23 hours
· parameters adjustable on ControlCOCKPIT:
temperature ( Celsius or Fahrenheit) , air flap
position, programme time, time zones,
summertime/ wintertime
· SetpointWAIT function - the process time
does not start until the set temperature is
reached
· Setting of languages on ControlCOCKPIT:
German/ English/ Spanish/ French
· resolution of display for setpoint and actual
temperature values 0.1° C
· calibration facility directly at ControlCOCKPIT
for three freely selectable temperature values
· programme stored in case of power failure
· incl. works calibration certificate for + 37° C
Overtemperature protection ( double)
· adjustable electronic overtemperature monitor
and mechanical temperature limiter TB,
protection class 1 according to DIN 12 880 to
switch off the heating approx. 20° C above
nominal temperature
Textured Stainless Steel Casing
· w x h x d: 585 x 787 x 514 mm
· fully insulated stainless steel door with 2-point
locking ( compression door lock)
· inner glass door
· rear zinc-plated steel
Interior - Heating Concept
· w x h x d: 400 x 400 x 330 mm, 53 l
· easy-to-clean interior, made of stainless
steel, reinforced by deep drawn ribbing with
integrated and protected large-area heating
on four sides
· 1 stainless steel grid
· Max. loading of chamber: 80 kg
Temperature Range
· min. 5° C above ambient up to + 80° C
Voltage / Power Rating
· 230 V ( + / - 10% ) , 50/ 60 Hz / approx. 1.000 W
Tampilkan Lebih Banyak